Measures and adjusts cartridge concentricity –  up to 1/10,000 of an inch

 

Decisive reduction of group size – by up to 50%
 
Pinpoints cartridges with irregular length and case surface
 
Brings industrially manufactured ammunition within tolerances of reloading
 
Helps reloaders measure and improve their high precision reloading
 
Easy and fast handling
 
Top quality dial indicator (up to 1/10,000'' reading)
 
Extensive testing has shown dramatic accuracy improvement
 

The device weighs under one pound and comes packaged in a plastic foam lined box for easy transporting to the field or to the shooting range.

Verify and align your rounds immediately before shooting them. Measuring and aligning is easy and fast, just a few seconds per cartridge, or five minutes for a box of 20 cartridges.

Improve the accuracy of every round. No more flyers. This is a must for anyone who buys commercially manufactured ammunition and wants the best results on every shot.

Even reloaders will experience better results.

Serious reloaders are particularly concerned with the problem of concentricity of their carefully reloaded ammunition. Even with the use of high precision tooling — promising a seating accuracy of the projectile within a 1/1,000 of an inch angle, there may be cartridges with wider flaws. This is primarily related to a non-uniformity of the brass and the resulting lack of concentricity of the neck to the body of the case. Other reasons may be a lack of experience or skill in the reloading process itself.

 
 
 
 

 

To print this Webpage, you need AcrobatReaderTM installed on your
system. You can downlaod it for free by clicking the Acrobat button.